Lolly
افتح التطبيق
  1. أنشئ
  2. التصميم والقوالب

Rebrand a deck

Lolly Rebrand reads every object in a slide deck and proposes each slide again on your design system's layouts, colours and typeface. Nothing is final until you decide: every change is a suggestion you can see, compare and answer before anything is written. Every change is a suggestion, and nothing is written until you decide.

Lolly Rebrand works on your device. The deck is not uploaded and the original file is never changed.

Two ways to rebrand

Choose one of two modes before you open a deck.

ModeWhat it doesWhen to use it
Renovate the layoutRebuilds each slide on your design system's slide master: its layouts, colours, typeface and marks.The deck should look like it was made in your design system from the start.
Keep the designKeeps every slide where it is and swaps in your theme, colours and fonts.The layout is fine and only the look needs to change.

The review below is for Renovate the layout; Keep the design has its own section.

Renovate a deck in four steps:

  1. Open a deck A .pptx, PDF or Photoshop file, or the sample deck.
  2. Work through the review list One card for each kind of object across the deck.
  3. Decide and choose layouts Keep, replace or remove each object, and pick a layout for each slide.
  4. Finish in Lolly Design One artboard per slide, ready to edit and export.

Try it with the sample deck

Open the Rebrand view from Utilities. The first screen asks for a deck and shows the design system the deck will go into.

The Lolly Rebrand screen before a deck is chosen: the mode, the drop area with Choose a deck, and the link to the sample deck. signed by Lollyvector SVG22 paths~6.2k nodes28 groups73 KBCheck it yourselfاحصل على الملف الموقَّع

Without a deck of your own, choose No deck to hand? Try the sample deck. It opens a made-up deck: a night market's review of its season, in its own old colours, fonts and lantern logo. The screenshots on this page use the sample deck.

Open your own deck

There are three ways in:

While the deck is read, a line says what is happening, for example "Reading slide 12 of 30", and the slides fill in underneath.

If your design system has no slide master, the Lolly Rebrand screen adds "with the neutral slide master" and the deck goes onto a plain master. A design system gets its masters, logos, colours and fonts in Lolly Design System Setup.

The review screen

When the deck is read, the review screen opens.

The review screen with the sample deck: the review list on the left, the proposed slide in the middle with the original above it, the decision panel on the right and the slides along the bottom. signed by Lollyvector SVG114 paths~12k nodes209 groups11 images216 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

It has five parts:

  1. The review list, on the left: the things to check, one card each.
  2. The slide, in the middle: the Proposed slide, large, with the Original small above it.
  3. The decision panel, on the right: what you can do with the selection.
  4. The filmstrip, along the bottom: every slide in the deck, in order.
  5. The footer: how many slides and cards are left, the Report, Accept all suggestions and Open in Design.

Suggestions and decisions

The Proposed slide shows every suggestion applied. A suggestion is not a decision. Nothing leaves Lolly Rebrand until you answer each card, or choose Accept all suggestions to take them all as shown.

Every change can be undone with Undo, next to the counts in the footer and in the top bar.

Work through the review list

The review list for the sample deck, grouped into Needs attention, Suggestions and Layouts. signed by Lollyvector SVG30 paths~6.8k nodes82 groups7 images157 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

A card stands for one kind of object across the deck, such as "Replace marks on 8 slides", so you answer the old logo once. The list has three groups:

Each card is in one of three states: Needs attention, Not reviewed or Accepted. The tabs at the top switch between To review, All slides and Removed, which lists everything taken out so you can bring an object back.

Compare the original and the proposed slide

The sample's second slide shown Both ways: the original deck's slide beside the proposed one in the design system. signed by Lollyvector SVG8 paths~1.5k nodes24 groups2 images26 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

Choose Original, Proposed or Both above the slide. To see the original without changing the view, hold the slide or the backslash key (\\).

To decide on an object, click the object on the slide. The caption under the slide gives the layout in use and points out anything to check, such as text that no longer fits its box.

Decide on an object

The decision panel for the old logo: Keep, Replace or Remove, and whether to apply the choice to all eight marks or only this one. signed by Lollyvector SVG49 paths~5.9k nodes69 groups1 image76 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

The decision panel's heading says what is selected, such as "Mark on slide 2" or "Slide 3 of 9". Under Decision:

When Lolly Rebrand is unsure of text it read, a Text field shows the reading for you to correct.

Further down the panel:

Choose a layout for a slide

The layout chooser for the sample's third slide, with its three cards: the layouts that fit it first, then every layout by kind. signed by Lollyvector SVG10 paths~3.3k nodes21 groups3 images54 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

Choose Change layout in the decision panel, or the layout name on a slide in the filmstrip. The chooser shows:

Point at a layout to preview the layout on the slide. Click to apply. A switch counts the other slides of the same shape, for example Also the 2 slides like this one, and applies your choice to them too. Match proposes a layout for every slide Lolly Rebrand recognised in one step and never changes a layout you chose.

A slide with more than its new layout holds continues onto another slide. The caption then reads "Part 1 of 2", and the report lists what moved.

Pick a deck theme

The deck theme choices, each drawn with the sample's first slide: Light and Dark, then the design system's looks. signed by Lollyvector SVG39 paths~2.6k nodes77 groups7 images70 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

The theme button in the top bar shows the deck's colours. Open it to choose Light or Dark for the whole deck, Brand colour where the design system has one, or one of its saved Looks. A managed design system, one its catalogue locks, offers no Looks here. Each choice is drawn with your own first slide. If a theme would make some text hard to read, the choice warns you first. Background in the decision panel changes a single slide.

Arrange the slides

The filmstrip of the sample deck: nine slides in order, the second one selected. signed by Lollyvector SVG28 paths565 nodes64 groups8 images70 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

The filmstrip is the deck in order. Drag a slide to a new place. Its menu (the three dots, or Shift+F10) offers Change layout, Leave out or Include, Move earlier, Move later, Move to position, Reset slide and Open in Design. Select several changes or moves many slides together.

A slide you leave out is not deleted: it stays in the project, and Include brings it back.

Press ? to see every keyboard shortcut. The common ones:

KeyWhat it does
Arrow keys, K and JPrevious and next slide
Shift and an arrowSelect more slides
Alt and an arrowMove the slide one place
LChange the layout
\\Hold to show the Original
Ctrl or Cmd and ZUndo
EscBack to one slide

Finish in Lolly Design

The Lolly Rebrand report for the sample deck: what was removed, what was placed, and the counts. signed by Lollyvector SVG59 paths~6.4k nodes97 groups8 images123 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

When the review list is empty, Open in Design becomes the main button. If cards are still waiting, Lolly Rebrand first asks whether to accept them as proposed. Accept all suggestions does the same in one step, and Undo reverses that.

Open in Design opens the result as a new Lolly Design document with one artboard per slide. Edit it there and export PowerPoint, PDF or pictures. Opening the result again later makes a new revision; the first one is never overwritten.

The sample deck opened in Lolly Design, each slide an artboard on the design system's slide master. signed by Lollyvector SVG301 paths~65k nodes377 groups4 images935 KBCheck it yourselfاحصل على الملف الموقَّع

The Report, in the footer, accounts for every object in the original deck: the objects removed, anything not placed or not drawn, the layouts used and the counts for the rest. Anything Lolly Rebrand could not place on a slide is listed under Not placed and waits on its own artboard in Lolly Design.

Keep the design

Keep the design with the sample deck: the result large, the original inset, and Download .pptx beside it. signed by Lollyvector SVG56 paths~7.0k nodes131 groups10 images172 KBCheck it yourselfاحصل على الملف الموقَّعTry it in the app

Keep the design replaces the former Theme swap tool. Choose Keep the design on the Lolly Rebrand screen or in the top bar. Lolly Rebrand swaps the theme, colours and fonts and says what changed, for example "Changed 5 theme colours, 4 slide colours and 2 fonts". Compare the result with Original, Result, Both or Wipe, then choose Download .pptx or Open the result in Lolly Design.

ملاحظة: Keep the design takes PowerPoint files only

Open a PDF or a Photoshop document with Renovate the layout instead.

Decks made of pictures

Some decks are pictures of slides, such as a scanned PDF or a PowerPoint file with one picture per slide. Lolly Rebrand says so ("All 15 slides are pictures") and offers Read the text, which rebuilds each slide from the text on its picture, or Keep as pictures.

Reading the text uses a text recognition model on your device. The first time, Lolly Rebrand offers to download the model and gives its size. The download sends nothing from your deck. The review list then holds a card such as "Rebuilt 15 slides from pictures", marked "Check each before Lolly Design".

Your projects

Every deck you open becomes a project, saved on this device. Recent projects on the Lolly Rebrand screen reopens one where you left it, with every decision you made. To move a project to another device, choose Download .lolly from the project menu (the three dots in the top bar) and open that file there.

From the command line

The same stages run from the command line and from AI agents: lolly rebrand plan, compile and inspect. Rebuild a deck from the terminal covers them.

Words you will see
WordWhat it means
SuggestionWhat Lolly Rebrand would do with an object. Shown on the Proposed slide, but not final until accepted.
CardOne entry in the review list. A card can stand for the same kind of object on many slides.
Needs attentionLolly Rebrand is unsure, or needs your choice before it can go on.
Slide masterThe set of layouts, colours and furniture a design system gives its slides.
Original arrangementThe slide's objects stay where they were, in the design system's colours and typeface.
Keep as a pictureThe slide stays exactly as it was, as one picture.
Left outA slide that will not go to Lolly Design. It is not deleted, and Include brings it back.
Not placedContent that fits no layout. It goes to its own artboard in Lolly Design.

Good to know

Lolly Rebrand's suggestions, layout matches and recognised text are its best reading of the deck, not a guarantee. Check them in the review; the report shows every outcome. Export a Keynote or Google Slides deck as PowerPoint first. Layer effects and adjustment layers in a Photoshop document are not carried, and the report lists each one.