Lolly
App öffnen

ErstellenDesign und Vorlagen

Rebrand a deck

Lolly Rebrand takes a slide deck someone else made and moves it onto your design system. It reads every slide, works out what each object on it is, and proposes each slide again on your design system's own layouts, in its colours and its typeface. Nothing is final until you decide: every change is a suggestion you can see, compare and answer before anything is written.

Lolly Rebrand works on your device. The deck is read here and is not uploaded, and the original file is never changed.

Two ways to rebrand

Lolly Rebrand offers two modes, and you choose one before you open a deck.

ModeWhat it doesWhen to use it
Renovate the layoutRebuilds each slide on your design system's slide master: its layouts, colours, typeface and marks.The deck should look like it was made in your design system from the start.
Keep the designKeeps every slide where it is and swaps in your theme, colours and fonts.The layout is fine and only the look needs to change.

The review below is for Renovate the layout; Keep the design has its own section.

Renovate a deck in four steps:

  1. Open a deck A .pptx, PDF or Photoshop file, or the sample deck.
  2. Work through the review list One card for each kind of object across the deck.
  3. Decide and choose layouts Keep, replace or remove each object, and pick a layout for each slide.
  4. Finish in Lolly Design One artboard per slide, ready to edit and export.

Try it with the sample deck

Open the Rebrand view from Utilities. The first screen asks for a deck, and says which design system it will go into.

The Lolly Rebrand screen before a deck is chosen: the mode, the drop area with Choose a deck, and the link to the sample deck. signed by Lollyvector SVG22 paths~6.2k nodes28 groups73 KBCheck it yourselfSignierte Datei holen

No deck to hand? Choose No deck to hand? Try the sample deck. It opens a made-up deck, a night market's review of its season, in its own old colours, fonts and lantern logo. The screenshots on this page all use it, so you can follow along step by step.

Open your own deck

There are three ways in:

While the deck is read, a line says what is happening, for example "Reading slide 12 of 30", and the slides fill in underneath.

If your design system has no slide master of its own, the Lolly Rebrand screen adds "with the neutral slide master" and the deck goes onto a plain one instead. Lolly Design System Setup is where a design system gets its masters, logos, colours and fonts.

The review screen

When the deck is read, the review screen opens.

The review screen with the sample deck: the review list on the left, the proposed slide in the middle with the original above it, the decision panel on the right and the slides along the bottom. signed by Lollyvector SVG114 paths~12k nodes209 groups11 images216 KBCheck it yourselfSignierte Datei holenTry it in the app

It has five parts:

  1. The review list, on the left: the things Lolly Rebrand wants you to look at, one card each.
  2. The slide, in the middle: the Proposed slide, large, with the Original small above it.
  3. The decision panel, on the right: what you can do with whatever is selected.
  4. The filmstrip, along the bottom: every slide in the deck, in order.
  5. The footer: how many slides and cards are left, the Report, Accept all suggestions and Open in Design.

Suggestions and decisions

The Proposed slide already shows every suggestion applied, so you can see where the deck is heading before you change anything. A suggestion is not a decision. Nothing leaves Lolly Rebrand until you have answered each card, or chosen Accept all suggestions to take them all as shown.

Every change you make is answered with Undo, next to the counts in the footer and in the top bar.

Work through the review list

The review list for the sample deck, grouped into Needs attention, Suggestions and Layouts. signed by Lollyvector SVG30 paths~6.8k nodes82 groups7 images157 KBCheck it yourselfSignierte Datei holenTry it in the app

A card stands for one kind of object across the deck, so you answer the old logo once rather than on every slide: "Replace marks on 8 slides". The list has three groups:

Each card is in one of three states: Needs attention, Not reviewed or Accepted. The tabs at the top switch between To review, All slides and Removed, which lists everything taken out so you can keep it after all.

Compare the original and the proposed slide

The sample's second slide shown Both ways: the original deck's slide beside the proposed one in the design system. signed by Lollyvector SVG8 paths~1.5k nodes24 groups2 images26 KBCheck it yourselfSignierte Datei holenTry it in the app

Choose Original, Proposed or Both above the slide. To glance back at the original without changing the view, hold the slide, or hold the backslash key (\\).

Click any object on the slide to decide on it. The caption under the slide gives the layout in use and points out anything to check, such as text that no longer fits its box.

Decide on an object

The decision panel for the old logo: Keep, Replace or Remove, and whether to apply the choice to all eight marks or only this one. signed by Lollyvector SVG49 paths~5.9k nodes69 groups1 image76 KBCheck it yourselfSignierte Datei holenTry it in the app

The decision panel's heading says what is selected, such as "Mark on slide 2" or "Slide 3 of 9". Under Decision:

If Lolly Rebrand read some text and is unsure of it, a Text field shows what it read, so you can correct it.

Further down the panel:

Choose a layout for a slide

The layout chooser for the sample's third slide, with its three cards: the layouts that fit it first, then every layout by kind. signed by Lollyvector SVG10 paths~3.3k nodes21 groups3 images54 KBCheck it yourselfSignierte Datei holenTry it in the app

Choose Change layout in the decision panel, or the layout name on a slide in the filmstrip. The chooser shows:

Point at a layout to preview it on the slide; click to use it. A switch counts the other slides of the same shape, for example Also the 2 slides like this one, and applies your choice to them too. Match proposes a layout for every slide Lolly Rebrand recognised in one step, and never changes a layout you chose yourself.

A slide with more than its new layout holds continues onto another slide. The caption then reads "Part 1 of 2", and the report lists what moved.

Pick a deck theme

The deck theme choices, each drawn with the sample's first slide: Light and Dark, then the design system's looks. signed by Lollyvector SVG39 paths~2.6k nodes77 groups7 images70 KBCheck it yourselfSignierte Datei holenTry it in the app

The theme button in the top bar shows the deck's colours. Open it to choose Light or Dark for the whole deck, Brand colour where the design system has one, or one of its saved Looks. A managed design system, one its catalogue locks, offers no Looks here. Each choice is drawn with your own first slide. If a theme would make some text hard to read, the choice warns you before you apply it, and Background in the decision panel changes a single slide.

Arrange the slides

The filmstrip of the sample deck: nine slides in order, the second one selected. signed by Lollyvector SVG28 paths565 nodes64 groups8 images70 KBCheck it yourselfSignierte Datei holenTry it in the app

The filmstrip is the deck in order. Drag a slide to move it. Its menu (the three dots, or Shift+F10) offers Change layout, Leave out or Include, Move earlier, Move later, Move to position, Reset slide and Open in Design. Select several lets you change or move many slides together.

A slide you leave out is not deleted: it stays in the project, and Include brings it back.

Press ? to see every keyboard shortcut. The ones you will use most:

KeyWhat it does
Arrow keys, K and JPrevious and next slide
Shift and an arrowSelect more slides
Alt and an arrowMove the slide one place
LChange the layout
\\Hold to show the Original
Ctrl or Cmd and ZUndo
EscBack to one slide

Finish in Lolly Design

The Lolly Rebrand report for the sample deck: what was removed, what was placed, and the counts. signed by Lollyvector SVG59 paths~6.4k nodes97 groups8 images123 KBCheck it yourselfSignierte Datei holenTry it in the app

When the review list is empty, Open in Design turns into the main button. If cards are still waiting, Lolly Rebrand asks whether to accept them as proposed first. Choosing Accept all suggestions beforehand does the same in one step, and Undo takes it back.

Open in Design opens the result as a new Lolly Design document, one artboard per slide, where you can edit anything further and export it as PowerPoint, PDF or pictures. Opening it again later makes a new revision; the first one is never overwritten.

The sample deck opened in Lolly Design, each slide an artboard on the design system's slide master. signed by Lollyvector SVG301 paths~65k nodes377 groups4 images935 KBCheck it yourselfSignierte Datei holen

The Report, in the footer, accounts for every object in the original deck: the objects removed, anything not placed or not drawn, the layouts used and the counts for the rest. Anything Lolly Rebrand could not place on a slide is listed under Not placed, and waits on its own artboard in Lolly Design so nothing is lost.

Keep the design

Keep the design with the sample deck: the result large, the original inset, and Download .pptx beside it. signed by Lollyvector SVG56 paths~7.0k nodes131 groups10 images172 KBCheck it yourselfSignierte Datei holenTry it in the app

Keep the design replaces the former Theme swap tool. Choose Keep the design on the Lolly Rebrand screen, or switch to it in the top bar. Lolly Rebrand swaps the theme, colours and fonts and says what it changed, for example "Changed 5 theme colours, 4 slide colours and 2 fonts". Compare the result with Original, Result, Both or Wipe, then choose Download .pptx, or Open the result in Lolly Design.

Notiz: Keep the design takes PowerPoint files only

A PDF or a Photoshop document cannot take this path, so open it with Renovate the layout.

Decks made of pictures

Some decks are pictures of slides rather than slides: a scanned PDF, or a PowerPoint file with one picture per slide. Lolly Rebrand tells you ("All 15 slides are pictures") and offers Read the text, which recognises the text on each picture and rebuilds the slide from it, or Keep as pictures.

Reading the text uses a text recognition model on your device. The first time, Lolly Rebrand offers to download it and says how large it is; the download sends nothing from your deck. The review list then holds a card such as "Rebuilt 15 slides from pictures", marked "Check each before Lolly Design", so you can check each rebuilt slide before it goes to Lolly Design.

Your projects

Every deck you open becomes a project, saved on this device. Recent projects on the Lolly Rebrand screen reopens one where you left it, with every decision you made. To move a project to another device, choose Download .lolly from the project menu (the three dots in the top bar) and open that file there.

From the command line

The same stages run from the command line and from AI agents: lolly rebrand plan, compile and inspect. Rebuild a deck from the terminal covers them.

Words you will see
WordWhat it means
SuggestionWhat Lolly Rebrand would do with an object. Shown on the Proposed slide, but not final until you accept it.
CardOne entry in the review list. A card can stand for the same kind of object on many slides.
Needs attentionLolly Rebrand is unsure, or needs your choice before it can go on.
Slide masterThe set of layouts, colours and furniture a design system gives its slides.
Original arrangementThe slide's objects stay where they were, in the design system's colours and typeface.
Keep as a pictureThe slide stays exactly as it was, as one picture.
Left outA slide that will not go to Lolly Design. It is not deleted, and Include brings it back.
Not placedContent that fits no layout. It goes to its own artboard in Lolly Design.

Good to know

Lolly Rebrand's suggestions, layout matches and recognised text are its best reading of the deck, not a guarantee. The review is there so you can check them, the report shows every outcome, and the original file is never changed. A deck from Keynote or Google Slides works once it is exported as PowerPoint. In a Photoshop document, layer effects and adjustment layers are not carried, and the report lists each one.