Lolly
앱 열기
  1. 만들기
  2. 모션과 프레젠테이션

Presenting with camera

Present with camera puts your camera, a logo and a lower third over a Lolly Design deck or the Countdown tool. The audience sees one 16:9 picture, and a separate private window holds your controls and speaker notes.

Presentation media stays on your device until you share it in a call or choose to record. No Lolly Work server is needed.

Audience window Share this in your call

One clean picture, 1280 × 720.

Private controls Stays on your side

CurrentNext

Speaker notes

  • Camera
  • Logo
  • Lower third
  • Saved scenes
  • Recording

Edits wait here until Apply scene.

You share the audience window in the call. The private window stays with you.

signed by Lollypresenting-two-windows.htmlHTMLpixels, not shapes9 KBAI editedgenerated by Claude Opus 5.5Check it yourself서명된 파일 받기

Start a presentation

  • Open your Lolly Design deck, open Present options and choose Present with camera. In Countdown, choose Present with camera above the tool.
  • Allow the private controls window to open. The original window becomes the audience output. Keep both windows open.
  • In Camera, choose a Camera device, then Start camera, and allow camera access if asked. The camera stays off until you choose Start camera.
  • Set up the layout and graphics below, then choose Apply scene.
  • In your call, share the audience tab or window and check the share preview.
경고: Share the audience tab, not a whole display

Sharing a whole display can include your private controls.

Keep your microphone selected in the call application. Starting the presentation camera does not start a microphone. Lolly cannot tell whether the call receives your picture, so check the picture from another participant's view before the talk.

The audience picture is 1280 × 720 at 30 fps. Browser or system borders can remain around a shared window. A tab share or a carefully framed capture gives the cleanest result.

메모: Changes wait for Apply scene

Layout, framing, logo and caption edits, and Remove logo, stay private until you choose Apply scene. Advancing a slide, starting or stopping the camera and showing or hiding the lower third happen at once. Applying a saved layout does not restart a stopped camera.

Set up the picture

Prepared scene chooses one of five layouts:

  • Content only
  • Camera inset
  • Side by side
  • Camera full screen
  • Holding screen

The five prepared layouts, as the audience sees them.

signed by Lollypresenting-layouts.htmlHTMLpixels, not shapes7 KBAI editedgenerated by Claude Opus 5.5Check it yourself서명된 파일 받기
LayoutAudience picture
Content onlyYour slides or tool fill the picture.
Camera insetYour camera sits over the content, where you place the inset.
Side by sideContent on the left, a tall camera area on the right.
Camera full screenYour camera fills the picture.
Holding screenA black picture. Applying it stops the camera and pauses the live tool.

Frame your camera

Open Camera → Framing. In the layout preview, drag the camera area to move the inset, or drag its corner to resize the inset. These controls work with Camera inset. Side by side and Camera full screen use fixed camera areas.

You can also type Camera left, Camera top, Camera width and Camera height in output pixels. Focus the preview's camera area and use the arrow keys to move it one pixel at a time, or ten with Shift. Focus its corner to resize the same way.

Change Camera device while the camera runs to switch sources. Lolly releases the old device first. If a device disappears, choose an available camera and start it again. Device choices last for this run only and are not saved with the presentation.

Add your logo and name

Open Logo and choose a PNG, JPEG, WebP or SVG image, then adjust Logo width. The logo sits top right by default. Tick Logo at top left to move the logo. Choose Apply scene once the image has loaded.

In Lower third, enter a name and a detail such as a role or topic, apply it, then choose Show lower third. The same button hides the lower third. Hide and show again to replay the entrance. Reduced-motion preferences remove the movement.

Keep reusable scenes

Open Saved scenes, enter a Scene name and choose Save scene. A document holds up to eight scenes, such as an opening slide, a speaker close-up and a closing layout. A document holds up to eight scenes.

Choose New scene before saving another arrangement. To update a scene, select it, change its settings and save again. Selecting a saved scene loads it privately. Apply scene sends it to the audience. Delete scene removes the entry and leaves the audience picture unchanged.

Scenes store the layout, camera framing, logo reference and caption text, but not a slide number or a Countdown duration. Save the document as usual afterwards. Reopening the document restores the applied arrangement and saved scenes, with the camera off and the lower third hidden.

During the talk

The private window shows the current slide, the next slide and speaker notes when the deck has them. Lolly Countdown shows its duration, start, pause and reset controls instead.

ActionControl
Advance or go back in a deckArrow keys or Page Down / Page Up, outside an input field.
Show black and stop the cameraPress B, O or Escape in the audience window.
Open or focus the private controlsPress S in the audience window. An open controls window keeps its camera state.
Resume after a holdPrepare the layout, choose Apply scene, then start the camera and restart the tool if needed.
FinishStop sharing in the call, then choose End presentation.

Closing the private window, or pressing Escape or S there outside an input, puts the audience on black, stops the camera, pauses Countdown and finishes any recording. Reopening the controls never starts the camera by itself. If the browser uses Escape to leave full screen, it may take that key first.

Record what the audience sees

Recording needs a browser that can capture a region of its own tab. The control tells you when that is unavailable. The macOS desktop app cannot record this way, but you can still share its audience window.

  1. Open Recording in the private controls. Leave Record microphone off for silent video, or tick it to include your microphone in the file. This setting is separate from your call microphone.
  2. Choose Record output, then press R in the audience window.
  3. In the browser's picker, choose that same audience tab, and allow the microphone if you chose to record one. Another tab or a window cannot produce this cropped recording.
  4. Present as normal. The recording follows the applied scene, including camera crop, logo and lower-third cues.
  5. Press R again in the audience window, or choose Stop recording, and let the file finish saving.

A take stops at 30 minutes or 512 MiB, whichever comes first. Lolly uses temporary local storage where it can and reports a failure if it cannot finish. Tool audio, call audio and virtual microphones are not mixed in.

경고: Closing or reloading can lose a take

If saving fails, keep the presentation open and choose Save recording to try again.

Use OBS Studio as a virtual camera (experimental)

Lolly does not install a virtual camera of its own. No trial from OBS Studio into a call has been completed for Lolly yet.

Create a separate OBS Studio scene for the Lolly audience window and frame only its 16:9 picture. On macOS, the macOS Lolly Screen Capture source offers a Window Capture method. Select the audience window and check that the private controls and window borders are left out. See OBS's macOS capture guide.

Select that scene in OBS's virtual-camera settings and choose Start Virtual Camera. Choose the OBS camera in the call application and keep its microphone selected separately. Before you present, check the received picture, including text, crop and mirroring. OBS describes its output choices in the Virtual Camera guide.

Troubleshooting
What you seeWhat to do
Private controls did not openAllow pop-ups for Lolly, then start the presentation again. Private notes never fall back into the audience picture.
Camera access deniedAllow camera access in the browser and system settings, then choose Start camera.
Camera busy or unavailableClose another app using it, check the connection or choose another Camera device.
Black output after closing controlsPress S in the audience window, apply the layout and start the camera.
A saved logo is unavailableChoose the image again and apply. A scene refers to the saved asset, so keep that asset with the document.
Record output is unavailableUse a browser with tab region capture, or record the shared window in another application.
Recording did not startChoose the audience tab itself and check the browser's capture and microphone permissions.
The call shows small or cropped slide textCheck the receiver's view and try the call's screen-sharing route. The call's camera layout may crop or shrink the picture.
메모: What has been tested

Browser composition and recording have automated tests. The macOS desktop controls have been tried in an installed development build. Trials on receiving devices in Meet, Zoom, Teams and OBS Studio are still pending. Background, minimised and sleeping-device behaviour is not yet checked on physical devices. Leave the audience window open and visible while you rehearse.

Saved presentation settings follow the document's normal save and share behaviour. Camera frames, device IDs, microphone permissions and live cues are not saved. To work on a document with others, see Working together.

Section links from the earlier guide